![Sup Board Surfbrett 스탠드 업 패들 PVC 더블 레이어 패들 Aufblasbares Paddel](/uploads/s/76450f5ffd9543ea93dcb2b4b22ebd0e.webp)
Sup Board Surfbrett 스탠드 업 패들 PVC 더블 레이어 패들 Aufblasbares Paddel
FAQ1. 어떤 종류의 보증을 받을 수 있나요? 우리는 모든 제품이 최소 1년 동안 결함이 없음을 보증합니다. 불량제품은 품질상의 이유로 확인 후 무상 교환해드립니다.;
기본정보
모델 번호. | AY-ST-028 |
애플리케이션 | 수상 스포츠 지역 |
인증 | CE |
액세서리 | 핸드펌프 + 백팩 + 가죽끈 + 수리 |
해당자 | 남여공용 |
무게 | 11kg---17,5kg |
크기 | 맞춤형 |
설계 | 맞춤형 |
운송 패키지 | 내부 가방 + 상자 |
사양 | 305*76*15cm |
등록 상표 | OEM |
기원 | 중국 |
HS 코드 | 89031000 |
생산 능력 | 한달에 1000 |
상품 설명
상품명 | SUP 보드 서핑 보드 스탠드 업 패들 PVC 더블 레이어 패들 풍선 패들 |
모델 번호 | AY-ST-028 |
해당자 | 남여공용 |
원산지 | 중국 |
재료 | PVC |
액세서리 | 핸드펌프 + 백팩 + 가죽끈 + 수리 |
크기 | 300*76*15cm; 320*80*15cm또는 맞춤형 |
무게 | 11kg---17,5kg |
최소 주문 수량 | 50개 |
패키지 | 내부 가방 + 상자 |
인증 | CE |
FAQ1.What kind of guarantee you can be given?We guarantee all the product will be good at least 1 year;defective products will be changed by a free replacement after confirmed because of Quality problem.2.What kind of wear and tear should I watch for?Besides a small leak or tear you should check around all the valves and seams once in a while to make sure they are secure and not leaking any air.You can do this by using soap and water mixture in a spray bottle.Other wear and tear to be aware of is any breaking down of the material or stains that should eventually be removed with acleaner.3.How should I store it?Store it in a dry place away from direct exposure to hot sunlight or cold conditions.Deflated and rolled into its carry bag, it can be stored in any small space such as in a closet or garage.The important thing to remember is to make sure it is completely dry before packing it away so you don't end up with mold and mildew to clean up later.4.How long does an flat surfboards take to inflate?With a hand pump,it will take about 4 - 8 minutes. With a good electric pump it can take 30 seconds to 1 minute.the barometric needle points to 15PSI5.What should I pay attention to when using it for the first time?After receiving the sup, please check if the product is damaged due to transportation, and make sure it is inflated before it is damaged.1. The first charge is recommended to inflate 80% and put it for 8 hours (spring, summer, autumn and winter) and put it into use.This can effectively extend the service life of the inflated product due to the need for a buffering process inside the product.2. The temperature in winter is low. Although the cold resistance index of our products reaches the market standard, PVC products will become hard and brittle at low temperatures during the delivery process. In order to prolong the service life of the products, it is recommended to be placed indoors for more than 24 hours. Re-inflate, otherwise it will easily cause rupture at the crease and cause air leakage.
좋아할 수도 있습니다.
문의 보내기
지금 보내